Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3 Press the Navigation buttons to scroll to Name.
4 Press the Navigation buttons to scroll to select the position and
make your choice of the second character, and so on. You can use the
alphabet A to Z, the number 0 to 9, +/ -, and blank and press OK
5 Press the OK
to store it.
6 When you return to the previous menu, press
DTV settings
When selecting DTV input signal in Manual Tuning, you can view the
on-screen signal strength monitor to see the quality of the signal being
received.
1 Press SETTINGS and the Navigation buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to Manual Tuning.
3 Press the Navigation buttons(Left and Right) to select DTV.
4 Press the Navigation buttons to scroll to select channel number you
want to adjust.
5 Press the Navigation buttons to adjust Frequency(kHz) and
Bandwidth(MHz).
6 Press the Navigation buttons to scroll to Add.
7 Press the OK
to store it.
8 When you return to the previous menu, press
Selecting a programme on the programme
list
1 Press LIST to access the programme list.
2 Press the Navigation buttons to select to desired programme and
press OK
.
3 When you return to the previous menu, press LIST.
NOTE
• You may find some blue programmes. They have been set up to be
skipped by auto programming or in the programme edit mode.
• Some programmes with the programme number shown in the
programme list indicate there is no station name assigned.
Using additional options
Adjusting aspect ratio
Resize an image to view at its optimal size by pressing Q.MENU or
accessing Aspect Ratio in the PICTURE menu.
NOTE
• The available ratio varies depending on the input source.
- 16:9 : Resizes images to fit the screen width.
14
- Just Scan : Displays video images in the original size without
removing parts of the edge of the image. (This function works
in DTV/Component/HDMI (720p / 1080i / 1080p) Mode.)
.
BACK.
NOTE
• If you select Just Scan, you may see image noises at the edge of
the original signal.
- Original : When your TV receives a wide screen signal it will
automatically change to the picture format broadcasted.
- Full Wide : When TV receives the wide screen signal, it will
let you adjust the picture horizontally or vertically, in a linear
BACK.
proportion, to fill the entire screen fully. 4:3 and 14:9 video is
supported in full screen without any video distortion through
DTV input.
- 4:3 : Resizes images to the previous standard 4:3.
- 14:9 : You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is viewed in the
same way as in 4:3, but is moved to the up and down.
- Zoom : Formats an image to fit the screen width. The top and
bottom of the image may not appear.
NOTE
• If you enlarge or reduce an image, the image may be distorted.
(4:3
4:3)
(16:9
16:9)
Publicité
Table des Matières
