Installation
20
English
Untitled-2 20
2. Disconnect the wire connectors (x3)
and the water tube (dispenser-featured
models only) from the coupler on the
left door.
NOTE
• The position of the connectors differs
with the model.
• Non-dispenser models do not come
with the water tube.
CAUTION
• Do not remove both doors
simultaneously. Make sure to remove
one door at a time. Otherwise, one of
the doors may fall and cause physical
injury.
• Make sure the refrigerator is off before
disconnecting the connectors.
3. Gently draw up the clamp in several
steps. To prevent finger injuries, do not
apply a sudden force to the clamp.
4. Pull up the clamp to remove it.
2018-08-29
11:09:10