Radio Data System (Rds) - Sangean RCR-20 Mode D'emploi

Radio Data System (RDS)

When you set the clock time using the RDS function, your radio will synchronize its clock time
whenever it tunes to a radio station using RDS with CT signals.
1. When tuning to a station transmitting RDS data, press and hold the Info/Menu button to enter the
menu setting.
2. Rotate the Tuning control knob until a clock symbol appears on the display. Press and release the
Tuning control button to enter the setting.
3. Rotate the Tuning control knob until "RDS CT" appears on the display. Press and release the
Tuning control button to confirm the setting. The clock time of the radio will set up automatically
according to the RDS data received.
4. When the action is completed, the RDS icon will appear on the LCD display indicating the radio
time is RDS clock time. The radio clock time will be valid for 2 days each time the radio time is
synchronized with RDS CT.
Note:
1) If clock time from local RDS station is not correct, you should consider disabling the RDS CT
function.
2) Please note that at times the RDS signal may broadcast the wrong time, this is the fault of the
radio station and not your radio.
GB
18