Operation Instruction - BWT Comfort BPNR05 Manuel D'utilisation

VI. Operation instruction
SYMBOL
Note:
You may set the desired water temperature from 18 to 35℃.

The on the right shows the inlet water temperature. The

on the left shows the set temperature by pressing
After you turn on the heat pump, the fan will start to run in 3

minutes. In another 30 seconds, the compressor will start to run.
During heating, the

be light.
2.2.1. Mode selections
will be light as standard when you turn on the heat pump.

Press the

DESIGNATION
Power ON/OFF Press to power on or off the heat pump
Mode Press to select Smart/Silence mode
Up/ Down Press to set desired water temperature
will be light. During cooling,
button to enter the Silence mode, the
11
OPERATION
or button.
will
will