Setting The Picture - Medion Pure Retro Mode D'emploi

SOUND SETTING
Against the menu option <EQUALIZER> you can set the predefined acoustic pattern.
Inputs / PIP >
Picture >
Display >
Sound > Volume:
Setting > Balance:
Info > Equalizer:
Option:
Volume audio output:
Max.switch- -on volume:
Volume control:
User EQ settings
←
. Select the menu option <USER EQ SETTINGS> to create your individual acoustic pattern.
The menu option <USER EQ SETTINGS> is displayed only if "User" is set in the menu option <EQUALIZER>.
Inputs / PIP >
Picture >
Display >
Sound > Volume:
Setting > Balance:
Info > Equalizer:
Option:
Volume audio output:
Max.switch- -on volume:
Volume control:
User EQ settings
←
VOLUME OFF
. Press the button [ ] on the remote control. The volume is turned off and the following info window appears on the
display for approx. 5 seconds:
TV - - 2 - - ZDF
MUTE
. The sound is switched on again, if you press the button [
following info window appears on the display for approx. 5 seconds:
TV - - 2 - - ZDF
STEREO
5.3

Setting the picture

When the display is switched on for the first time basic values are set for contrast, brightness, picture sharpness and colour.
You can individually change these values as described below, depending on your personal taste and the location of the
display or the light incidence associated with it.
CONTRAST
. Press button [ "] and the contrast becomes greater.
. Press button [ A ] and the contrast becomes less.
BRIGHTNESS
. Press button [ " ] and the picture becomes brighter.
. Press button [ A ] and the picture becomes darker.
PICTURE SHARPNESS
. Press button [ " ] and the picture becomes sharper.
. Press button [ A ] and the picture becomes softer.
ENGLISH
Rock
Rock
Stereo Jazz
User
Flat
Pop
ON
Classic
>
Vocal
User
Stereo
ON
>
< 120 Hz:
500 Hz:
1.5 kHz:
5 kHz:
> 10 kHz
←
], [ A Vol - ] or [ " Vol + ] on the remote control. The
17