Settings For Pc (Dvi); Select Inputs - Fujitsu Siemens Computers MYRICA VQ40-1 Manuel D'instructions

Operator control

Settings for PC (DVI)

Select inputs

28
V Pos.
S Sets the vertical picture position [
V Size
S
Sets the vertical picture size [
H Pos.
S
Sets the horizontal picture position [
H Size
S
Sets the horizontal picture size [
Phase
S Eliminate flickering and distortions.
S To close the menu press the red button.
S Press the [MENU] button to open the main menu.
S With the button [ ] or [
Y
menu and press the button [
S
Select <Overscan> [ ] / [
Y
[ ].
"
Overscan
S Switch <Overscan> on and off [
As soon as the option Overscan is switched on, the
edge of the picture is cut by approx. 10 %. Any faults
on the edge of the picture are eliminated or made
non-visible by this cutting facility.
S To close the menu press the red button.
For the selection of an input use the selection menu
<Inputs>.
S Press the button [SOURCE] or [F4] to open the se-
lection menu <Inputs>.
S Select input [ ] / [ ] and then press the red button.
Y B
] / [ ].
A "
] / [ ].
A "
] / [ ].
A "
] / [ ].
A "
] select the <Display>
B
].
"
] and press the button
B
] / [ ]
A "
ENGLISH