Setting The Decoder; Editing The Channel Overview - Fujitsu Siemens Computers MYRICA VQ40-1 Manuel D'instructions

Setting the decoder

Editing the channel overview

It is described below how you can change the sequence of stored TV channels or delete them from the channel overview.
ENGLISH
You can use the SCART1 or SCART2 input to connect
a decoder for coded TV channels (pay TV).
S Select <Decoder> [ ] / [
Y B
You have the following selection options:
Decoder Decoder
Sound
Normal Uncoded
Decoder A SCART1 Uncoded
Decoder B SCART1 Coded
Decoder A SCART2 Uncoded
Decoder B SCART2 Coded
S Press the [MENU] button to open the main menu.
S With the button [ ] or [ ] select the <Setup> menu
Y B
and press the button [ ].
"
S Select <Tuner> with the button [
the button [ ].
"
S Select the menu option <Edit station list> [
and press the button [ ].
"
The menu <Edit station list> appears on screen.
Sort
S With the buttons [ ] select the channel that is
YBA"
to be shifted.
S Press the yellow button. The channel is marked yel-
low.
S Shift the channel with the buttons [
desired position.
S Press the yellow button on the remote control to
complete the procedure.
Deleting a channel
S With the buttons [ ] select the channel that is
YBA"
to be deleted.
S Press the green button to delete the selected chan-
nel from the channel overview.
S To close the menu press the red button.
Operator control
].
TV channel
Picture
Uncoded
Coded
Coded
Coded
Coded
] or [ ] and press
Y B
] / [ ]
Y B
] to the
YBA"
17