User Information - Bemer Classic-Set Mode D'emploi

These operating instructions contain import-
ant information. Keep them close to your prod-
uct in order to inform yourself about safety in-
structions as well as proper handling.
Please read the operating instructions very
care fully before using the product. This way,
you can be assured that you benefit from all
advantages that this system has to offer and
protect yourself and others from harm.
The BEMER products are designated only for
the described, intended use according to the
operating instructions.
14

User information

Application principles
1. general full body application
The standard general full body application is carried out with
the applicator module B.BODY* using a maximum average
intensity of 35 μT, which corresponds to the basic plan (BP)
and is used for the general improvement of the overall physical
well being of the body.
B.BODY is the standard applicator module used for the basic
plan, and has the same positive effect regardless which side of
the mat you choose to use. The body position on the B.BODY *
should be in the middle of the mat. It does not matter if the head,
legs, or both, of taller users extend beyond the edges of the mat.
You will recognize the head area of the B.BODY from the con-
nection cable.
For use with the Sleep Program, the B.BODY can be installed in
the bed with the help of the attachment belt (on page 27).
People with limited physical movements may be "covered" by the
B.BODY *, which they can use in either a sitting or lying position.
* Applies to the B.BODY Classic and B.BODY Professional.
2. targeted application
The additional applicator modules B.SPOT and B.PAD are
intended for targeted and intensive application of individual
body parts, working with a maximum flux density of 100 μT.
The targeted application should follow the application of the
basic plan and should be applied to shoulder, waist, back and
lower extremities.
B.SPOT is an intensively active applicator module for use in
localized and targeted application. B.SPOT is attached to the
universal B.GRIP holder and held on the body area to be treat-
ed. Alternatively, the holder and applicator module can also
be attached to the part of the body in need of application us-
ing the attachment strap provided.
fr es en
B.PAD is an intensively active applicator module for targeted,
small surface application on individual body parts. The B.PAD
is especially attractive because of its flexibility, and can be at-
tached with the help of a Velcro fastener strap to nearly every
conceivable part of the body. The B.PAD can provide a partic-
ularly valuable services when used on disabled or mobility-im-
paired individuals.
The B.LIGHT module can be used for superficial cosmetic
application. The light-emitting diodes create a monochromatic
and highly effective photobiological red light. This stimulates
the
skin and connective tissue cells to produce additional energy-
rich compounds. The effect of the B.LIGHT is comparable to
the effect of cold laser applications.
15