A1-A2 - Bemer Classic-Set Mode D'emploi

Special application – Sleep Program
• •
Activate the Sleep Program by pressing Designate the desired application
the [S] key. 7:00 appears on the display
module [A1/A2] by repeatedly
(= 7 hours). pressing [SET].
• •
Select the desired duration
Start the program with
(6, 7 or 8 hours). [START/STOP].
Example – Sleep Program (2 B.BODY applicator modules connected, both simultaneously in operation)
36
The display screen will fade
after 90 seconds, so as not to
disrupt your sleep. It can be
reactivated at any time by
pressing any key once.
Light application
•
Designate the applicator module [A1/A2],
by repeatedly pressing the [SET] key.
•
Select the desired light intensity by selecting
a number from [1] through [10].
•
Start the program with [START/STOP].
Example – using light application (B.LIGHT connected on port A2)
fr es
Begin the light application at intensity 6 (for 2 mins) and increase
by one intensity level every 2-3 days, and increase the length of
use by 2 minutes.
The duration of the application at level 10 is usually over 8 min-
utes. However, for those with very sensitive skin, lower intensity
levels can also be selected.
Always use the safety glasses supplied!
Please note that the set intensity level (only
for B.BOX Classic) will not switch off auto-
matically after 2, 4 or 6 minutes.
You must stop application manually at the
proper time according to the recommended
application times listed above.
en
37