Memory Card (If Inserted); Plus Signal (If Active) - Bemer Classic-Set Mode D'emploi

Program selection
• •
Press the [PROGRAM] button; if a memory Activate or deactivate the plus Signal
card is inserted, press the button
by pressing the button [PLUS].
•
[PROGRAM] again.
After making the selection, start the
•
Select the desired program by pressing the
chosen program with [START].
button of one of the predefined programs
P1-P3 and, as needed, the available
programs 4-12.
Example – Program P1 (with the applicator module B.PAD via port A1)
44
Application using the memory card
•
The memory card is not standard equip- Slide the memory card into the card slot.
•
ment. Please refer to your local BEMER
Press the [PROGRAM] button.
partner or BEMER support for more infor-
•
Press the [CARD] button.
mation.
•
Start the program with [START].
Example – application using a memory card (using the applicator module B.PAD via port A1)
fr es en
The [CARD] selection is available
only when a memory card is
inserted.
45