poolstar NETSPA CLEANER Guide D'utilisation page 21

7. trouble shooting
problem
Battery is running
out
Impeller is jammed Power off the cleaner and visually check
Cleaner does
not capture
the debris
Impeller is broken
When the filter
bag is full
Garbage flow- The soft rubber of
ing out from the rear impeller is
the Transpar- broken
ent Suction
Head part
Garbage flow Filter sock is
out from the damaged
rear filter bag
Handle/pole Side pin broken
connector
cannot be
secured in
assembly
Cleaner Battery is dead
cannot be
recharged
(available for
P1113)
The charger is out
of order
possible cause remedy
Charge the battery again, When full
charged, Alkaline AA battery can work for
70-80min or NI-MH AA battery can work for
45-60min.
the gap in middle of the cleaner to see
if the impeller is jammed. If the impeller
jammed, see behind "how to clear the dirt
on the impeller".
Contact your dealer for impeller
replacement.
Detach the filter basket and filter bag, and
clean them.
The soft rubber of rear impeller is like a
door in case the garbage in the filter bag
will flow backwards into impeller and the
cover of transparent suction head part.
Replace a new filter sock.
Using the new V-Shape clip
Contact dealer for battery replacement.
WarNiNG! When you replace NI-MH battery, please
contact the local dealers to purchase the original
NI-MH battery in case that the electric cleaner is
destroyed.
Contact dealer for proper transformer.
WarNiNG! Using wrong charger will result in
damaging the cleaner /battery and void the warranty.
21