Base Grille; Location Requirements - Haier HRF24E3APS Guide De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3. Lower the drawer front until the holes in the drawer front
bracket and the sliding rail are aligned.
4. Replace the screws securing the freezer drawer front brackets
to the sliding rail assemblies.
5. Replace the freezer bin.
ALIGNING THE FREEZER DRAWER
If the freezer drawer is not level across the top:
1. Loosen the two side screws, but do not remove the screws.
2. Using the top fastener, adjust the freezer drawer.
3. When the freezer drawer is level, tighten the two side screws.

BASE GRILLE

1. Remove the screws from the bottom of the front of the cabinet.
2. Align the base grille with the holes in the cabinet.
3. Using the three screws, removed in Step 1, install the base grille
to the cabinet.
INSTALL THE HANDLES
All the handles are identical.
1. Place refrigerator door handles onto the door guide with the
setscrews facing the center of the refrigerator.
2. Using the hex key (provided), tighten the setscrews.
6
3. Place the freezer door handle onto the door guide with the
setscrews facing downward.
4. Using the hex key (provided), tighten the setscrews.

LOCATION REQUIREMENTS

WARNING
Explosion Hazard
Keep ammable materials and vapors, such as gasoline,
away from refrigerator.
Failure to do so can result in death, explosion or re.
IMPORTANT: This refrigerator is designed for indoor, household use
only.
To ensure proper ventilation for your refrigerator, allow for 1/2"
(1.25 cm) of space on each side and at the top. Allow for 1" (2.54 cm)
of space behind the refrigerator. If your refrigerator has an ice
maker, allow extra space at the back for the water line connections.
When installing your refrigerator next to a fixed wall, leave 21/2"
(6.3 cm) minimum to allow for the door to swing open.
NOTE: This refrigerator is intended for use in a location where
the temperature ranges from a minimum of 55°F (13°C) to a
maximum of 110°F (43°C). The preferred room temperature range
for optimum performance, which reduces electricity usage and
provides superior cooling, is between 60°F (15°C) and 90°F (32°C). It
is recommended that you do not install the refrigerator near a heat
source, such as an oven or radiator.

Publicité

Table des Matières
loading

Table des Matières