Alesis DM10 MK II PRO Guide D'utilisation page 4

Rear Panel
1. Phones Output: Connect 1/4" (6.35 mm) stereo headphones (sold separately) to this
output. Control the volume by turning the Phones Volume knob on the top panel.
2. USB MIDI/Audio Port: Connect this USB port to a computer using a standard USB cable.
The drum module will send MIDI messages and audio to and from your computer over this
connection.
3. USB Port: Connect a USB flash drive to this USB port to record songs to it, load samples
from it, or save and load kits, songs, and triggers. See
more.
Important: Your USB flash drive must use a FAT32 file system to work properly with the
drum module.
4. MIDI Out/Thru: Connect an external MIDI device (synthesizer, sound module, etc.) to this
output using a standard 5-pin MIDI cable.
5. MIDI In: Connect an external MIDI device (sequencer, drum machine, etc.) to this input
using a standard 5-pin MIDI cable.
6. Outputs: Connect your audio interface, mixer, powered monitors, etc. to these outputs
using standard 1/4" (6.35 mm) TS cables.
7. Tom 4 Trigger Input: Connect the Tom 4 drum pad to this input. Refer to the Assembly
Guide for more information.
8. Crash 2 Trigger Input: Connect the Crash 2 cymbal pad to this input. Refer to the
Assembly Guide for more information.
9. Aux Input: Connect an additional audio player (smartphone, tablet, etc.) to this input using
a standard 1/8" (3.5 mm) stereo/TRS cable. The sound will be mixed with the drum
module's sounds.
10. Power Input: Connect this input to a power outlet using the included power adapter.
4
1 2 3 4 5 6 7
Operation > USB Drive
8 9 10
to learn