Blyss NT10SSR Mode D'emploi page 15

Press OK to confirm minute setting and move to day of week setting1-7.
Press OK to confirm or after 30 seconds, it will automatically save and go back to
working interface.
2. Program mode setting
Press MENU to enter setting interface, and
When is flashing, press OK to enter setting interface.
Under program mode, you can choose from 7 pre-set 24-hour programs (P1-P7) for
each day of week. The 7 pre-set 24-hour programs (P1-P7) are programable. For
each hour, you can choose between comfort mode and economic mode.
Under program mode, the default setting for day 1 to 7 of the week are as follows:
day 1 to day 5: work with P1,
day 6 to day 7: work with P3.
The default setting of P1-P7 are as follows:
Press / to choose day of week, and
programs (P1-P7), Or press OK to confirm previous setting and enter setting for next
day. After setting of last day, press OK to confirm or after 30 seconds, it will
automatically save and go back to working interface.
Day of week
P1
P2
P3
P4
P5
P6
P7
/ to choose program mode setting
/ to choose from 7 pre-set 24-hour
EN
Quick start
Pre-set 24-hour
program P1-P7
.
15