Temperature Setting - Blyss NT10SSR Mode D'emploi

REMARKS: under window function, pilot control is not available.
II. Temperature setting
1. Under the mode of comfort or Eco (excluding anti-freezing mode), temperature is
adjustable. Press
5°C and 29°C. The temperature difference between mode ECO and mode comfort is
3.5°C, so the temperature range of mode ECO is between 1.5°C and 25.5°C.
2. Press other buttons except
3. When the room temperature is higher than the selected temperature, the heater
will stop heating.
III. Setting menu (MENU button)
Press MENU to enter setting menu interface.
Press / or /
motion sensor
Press MENU to exit the setting menu or after 30 seconds it will automatically exit and
go back to working interface.
1. Time setting
Press MENU to enter setting interface, and
is flashing, press OK to start time setting.
Press / to toggle among day of week, hour, and minute, and
week, hour, and minute.
Press OK to confirm hour setting and move to minute setting 00-59.
/ to choose the desired temperature for comfort mode between
/ to finish the setting, or it will automatically save.
to choose from time setting
. The selected icon will flash while other icons keep on.
, program mode setting
/ to choose time setting
EN
Quick start
,
. When
/ to set day of
14