Valley Sportsman 008858664 Manuel D'instructions page 12

4. Press the canister button to start vacuuming. – Fig. 2.
To ensure there is no air leaking between the cover and the canister, use your
hand to push down on the cover at the beginning of vacuuming. The machine will
stop automatically when enough vacuum pressure is achieved.
5. Take out the hose tube from the canister or bowl immediately after the job
is completed.
Note: When moist food is being vacuumed, moisture will be stored in the
adapter. Remember to clean up the adapter if there is water before vacuuming.
Open Canister After Vacuum Packaging
In order to open the canister, you need to press the "Release" button on the
canister cover.
Note:
●At the beginning of vacuum packaging in a canister or a vacuum bowl, slightly
press down on the cover or on the hose adapter for a few seconds to ensure the
hose is not loose and to avoid air leaking through the gap between the cover and
the canister top rim.
●To test the vacuum, simply tug on the cover. It should not move.
●Different canisters are available in the market. The operation procedure will be
a little different. Please refer to the individual manual for the specific canister.
11