Media Player As Upnp Server - DNT IPdio Tune Mode D'emploi

Rotate the dial select YES/NO to confirm that Repeat mode should be enabled.
If you select 'UPnP Severs' menu:
Locating and playing media files using the radio and UPnP
Once the UPnP server is configure to share media files with the internet radio, you can play the files by
doing the following on the radio.
Keep pressing BACK to get to the radio's top-level menu and then rotate the dial to select 'Media Player'.
Press SELECT and then rotate the dial to highlight 'UPnP Severs'.
Press SELECT and the radio will scan for all available UPnP servers. Note, this may take a few seconds
for the radio to complete its scan and before the scan has completed, the radio will display '[Empty]'. The
radio will continue to display '[Empty] if no UPnP servers are found.
After a successful scan, select your UPnP server, by rotating the dial if there is more than on UPnP server,
and then press SELECT.
The radio will now list the media categories available from the UPnP server, e.g. 'Music', 'Playlists' etc.
Rotate the dial to select which category you wish to browse, press SELECT and rotate the dial to highlight
a sub category and press SELECT again. For example, you could select 'Music' and then 'Album'.
Rotate the dial to highlight the media files that you wish to play and press SELECT.
The radio will display '[Add to Queue]', press SELECT and the radio will add the tracks to its queue and
begin playing them automatically.
Setup a Windows PC to allow the radio to access you audio files via an UPnP serves
If your PC is running Microsoft Windows XP, then you can use Windows Media Player 11(WMP11) to act
as your UPnP( Universal Plug and Play) media server 1.0. Windows Media Player 11 may be downloaded
from Microsoft's website and install by following the instructions detailed in its installation wizard.
Once installed, Windows Media Player 11 will create a library from all the media files available to it on your
PC. To add new media files to the library, select' File > Add to Library...> Advanced Options', Click 'Add'
and choose the files you wish to add and click' OK'.
You will now need to connect your Internet radio to Windows Media Player 11 and configure it to allow the
radio to access your media library. In order to this , you will need to do the following:
Keep pressing BACK to get to the radio's top-level menu and then rotate the dial to select 'Media
- 41 -
UPnP