Overview; Function - Maico aeronom WS 150 Instructions D'installation, D'utilisation Et D'entretien

2. The ventilation system

2.1 Overview

2.2 Function

The top pictures on the left show the components of the ventilation system
(ventilation unit , here shown as a right-hand version, supplied / operator unit
as an accessory). The lower picture on the left, shows the schematic
construction of a ventilation system, combined with additional system
components.
Ventilation unit
1.1 Outside air filter
1.2 Outside air fan
1.3 Plate heat exchanger
1.4 Exhaust air filter
1.5 Outgoing air fan
1.6 Condensation run-off
Operator unit (accessory)
2.1 Ventilation step display
2.2 Timer
2.3 Operating mode selector switch
2.4 "Filter change presetting "
rotary knob = Timer
2.5 "Change filter" red indicator light
2.6 "Operating level 3" yellow
indicator light
2.7 "Reset filter" button
3 Earth heat exchanger
(accessory)
4 Tubular sound absorber
(accessory)
5 Electrical/hydraulic re-heating
(accessory)
6 Electrical pre-heating
The outside air is fed through the earth heat exchanger and ducting system into
the plate heat exchanger within the ventilation unit. At the same time, warm
exhaust air from the living rooms flows through the plate heat exchanger.
Outside air and exhaust air channels are separated in the heat exchanger. The
heat energy from the exhaust air is transferred to the outside air that is flowing
in. The outgoing air fan transports the cooled exhaust air in the heat exchanger
to the outside.
2. The ventilation system
2.1 Overview
A Outside air: Fresh air that is
drawn in from the outside.
B Supply air: Warmed, fresh air
that flows into the living area.
C Exhaust air: Used, warm air that
is extracted from the living area.
D Outgoing air: Used and cooled
air that is returned to the outside.
– Rating plate, below the con-
nection ducts leading out of
the unit.
The arrows show the direction of
the air flows.
5