Changing The Lamp - Veripart VPKVC143 Mode D'emploi

Follow the steps below to remove frost build-up:
1. Remove any frozen food, shut off the mains power supply, open the
fridge freezer combination door, and gently scrape any frost from the
inner wall using an ice scraper. To speed up the thawing process, you
can place a bowl of hot water inside the fridge freezer combination
and, once the iced-over frost becomes loose, use an ice scraper to
scrape it off and remove it.
2. After defrosting, clean the inside of the fridge freezer combination and
switch on the power supply.

Changing the lamp

The LED lamp used to light the interior of the fridge freezer combination offers
low energy consumption and a long service life. In case of any abnormality,
please contact the after-sales personnel for a service call-out. The lamps, like
all parts of the appliance, can only be replaced by the manufacturer.
Note!
• Electric shocks or fires may result if the power cord or plug is
damaged or covered with dust. If there is any abnormality, please
unplug the appliance and contact the vendor.
50