Preparation For Use - Veripart VPKVC143 Mode D'emploi

PREPARATION FOR USE

Installation location
1. Ventilation
The position you select for the fridge freezer combination installation
should be well-ventilated and cool. Do not locate the fridge freezer
combination near a heat source such as a cooker or boiler, and
avoid situating it in direct sunlight, thus guaranteeing the refrigeration
effect while saving energy consumption. Do not put the fridge freezer
combination in a damp place, in order to prevent the fridge freezer
combination from rusting and leaking electricity. The area of the total
space of the room in which the fridge freezer combination is installed,
when divided by the refrigerant charge amount of the fridge freezer
combination, should not be
less than 8 g/ M³.
Note!
• The amount of refrigerant contained in the fridge freezer combination
can be found on the rating label.
2. Heat dissipation space
When working, the fridge freezer combination gives off heat to its
surroundings. Therefore, at least 30mm of free space should be left
on the top, more than 100mm on both sides, and more than 50mm at
the back of the fridge freezer combination.
39