Operating The Appliance - Beko VRT 61814 VR Mode D'emploi

3 Operation
2. The charging indicator LED (15) will come on
and the product will start to be charged; when
charging is done, all charging indicators will
become on.
– If the charging indicator LED (15) is on, this
means that the product is being charged.
– If all levels of the charging indicator LED (15)
is on, this means that the product has been
charged.
C
It takes up to 4-6 hours for the
appliance to be fully charged.
A
WARNING: Appliance cannot be
operated during the charging
process.

3.4 Operating the appliance

1. Press the on/off button (2) to switch on the
appliance.
2. When you press on/off button (2), appliance
will start at maximum speed. Press speed
adjustment button (3) to use in low speed.
When you press speed adjustment button
again, the appliance will run at maximum speed
again.
3. After using the appliance, switch it off by
pressing the On/off button (2).
Vacuum Cleaner / User Manual
Check the power indicator LEDs
(15) during operation. As charging
C
level decreases, these indicators will
gradually go off and the appliance
will stop working when all indicators
are off.
C
Appliance will automatically stop if it
is placed on charger while still in use.
3.5 Starting cordless vacuum
cleaner
1. Press removal button (5) to remove the vacuum
cleaner from the body (8).
2. Press on/off button (7) of the cordless vacuum
cleaner to switch on your appliance.
3. After using the appliance, switch it off by
pressing the On/off button (7) of the cordless
vacuum cleaner.
9 / EN