Basic Operations; Operating Modes - SmartGyro Speed Way Manuel De L'utilisateur

Speed Way - User Manual

Basic operations

1. Display and accelerator
1.1 Power button
1.1 With the skate off, press the on / off button for 3 seconds and it will be on,
the device will turn off automatically after more than 90 seconds of inactivity.
1.2 With the skate turned on, press the on / off button for 3 seconds to turn off
the device.

2. Operating modes

2.1 With the skate on, press the "+ y -" button to switch between the 3 opera-
ting levels.
2.2 When level 1 is selected, the engine will maintain a 30% performance at
maximum speed, reach about 10 Km / h.
2.3 When level 2 is selected, the engine will maintain 80% performance at maxi-
mum speed, reach about 20 Km / h.
2.4 When level 3 is selected, the engine will maintain 100% performance at
maximum speed, reach about 25 Km / h.
3. Brake control
3.1 The brake cuts the motor power. When you need to brake or stop the device,
you can do so by using the brake levers that actuate the brake discs. Try not to
brake sharply to avoid falls.
3.2 If the pavement is wet or raining, the brakes may have difficulty stopping the
skid. If these conditions occur, it is recommended not to exceed 10 km / h.
smartgyro.es
30
English