Control Panel; Wash Cycle Descriptions - Avanti DW18D0WE Manuel D'instructions

7
Program Indicator light next to the selected program will turn on while the cycle is
1 running. During the wash cycle the indicator light for the selected program will blink
intermittently.
2 Rinse Aid Warning Light will turn on when the dispenser needs to be refilled.
3 Power Indicator light will turn on when the Power ON/OFF button is pressed.
4 ON/OFF Button: Press to turn the unit ON/OFF
Start / Pause Button: Press to start the wash cycle, press again while the unit is in
5
operation to pause the wash cycle.
Program Selector Button: Press the button to select the appropriate wash cycle for your
6
needs.
Once the program has been selected the appropriate indicator light will flash/blink
intermittently
Pre-Programmed Wash Cycles
Cycle Selection
Program
Information
For the heaviest soiled
loads, such as pots, pans,
casserole dishes and dish es
that have been sitting with
Heavy
dried food on them for a
while
For normally soiled loads ,
such as pots, plates,glasses
Normal
and lightly soiled pans.
standard daily cycle.
(AHAM)
For lightly soiled loads,such
asplates,glasses,bowls and
Light.
lightly soiled pans.
A shorter wash for lightly
soiled loads that do not
need drying.
Speed

CONTROL PANEL

1 2
1
2
3
4
5
6
7
6 5
Description Detergent
pre/main
of Cycle
Pre-wash
Pre-wash(122°F)
Wash (127°F)
Rinse
Rinse (144°F)
Drying
Pre-wash
Wash (122°F)
Rinse
Rinse (131°F)
Drying
Pre-wash
Wash (122 °F)
Rinse
Rinse (131°F)
Drying
Pre-wash
Wash (122°F)
Rinse(131°F)
Drying
7
Program Indicator Lights
Rinse Aid Low Indicator Light
Power Indicator Light
Power ON / OFF Button
Start / Reset Button
Program Selector Button
Air Vent
Running
Energy
time(min)
(Kwh)
18g
125 0.51
18g
115 0.594
18g
85 0.291
15g
65 0.29
Rinse
Water
(gal) Aid
4.41
3.09
3.54
2.7