Cleaning And Maintenance; After Every Use - Philips HP6317/01 Mode D'emploi

The comb attachment can be put onto the shaving head in different
positions, depending on the area to be trimmed.
1 Set the Trim/Shave slide to the 'Trim' position (Fig. 11).
 To trim the bikini zone, place the comb attachment on the shaving
head with the recess of the attachment on the front of the
appliance (Fig. 1).
3 To trim the underarms, place the comb attachment on the shaving
head with the recess of the attachment on the back of the
appliance (Fig. 13).
4 Switch on the ladyshave.
5 Move the appliance against the direction of hair growth.
Make sure the surface of the comb always stays in contact with the
,
skin (Fig. 14).
shaping
1 Remove the comb attachment to shape precise lines and contours,
e.g. in the bikini zone (Fig. 15).
 Lock the long hair trimmer by setting the Trim/Shave slide to the
'Trim' position (Fig. 11).

Cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.

after every use

Clean the ladyshave every time you have used it.
1 Switch off the ladyshave.
 Remove the shaving foil (Fig. 16).
Do not exert any pressure on the shaving foil to avoid damage.
3 Gently shake the shaving foil to remove hairs or clean it with the
brush supplied.
EnglisH
7