Pbx / Supplementary Services - switel TC 37 CLIP Mode D'emploi

7 PBX / Supplementary Services

F button on private branch exchanges
If the telephone is connected to a private branch exchange, functions
such as transferring calls and automatic call back can be used via the
F button. The sales outlet where you purchased the exchange can
provide information as to whether the telephone will work properly with
the exchange.
Dialling pause
When using private branch exchanges, it is necessary to dial an access
code to obtain the dialling tone for an outside line. When using some ol-
der private branch exchanges, it takes a little time before the dialling
tone becomes audible. In the case of such private branch exchanges, a
dialling pause can be inserted after the number for an outside line in or-
der to continue dialling directly without having to wait for the dialling
tone.
P
After dialling the number for the outside line, the telephone waits ap-
prox. 3 seconds before dialling the actual phone number.
F button and supplementary services
Your telephone supports supplementary services provided by your tele-
phone network provider, such as brokering, call waiting and conference
facilities. These supplementary services can be used by implementing
the F button. Also contact your telephone network provider with re-
gard to enabling supplementary services.
Caller number display (CLIP
If this function is available with your telephone line, the number of the
caller appears in the display when the phone rings. If the caller has sup-
pressed transmission of his phone number, the corresponding message
appears in the display. The phone number is not displayed and, as a re-
sult, is not stored in the call list.
The caller number display function is an optional service
offered by telephone network providers. Contact your net-
work provider for further information.
1
CLIP: Calling Line Identification Presentation = Displays the caller's
phone number.
PBX / Supplementary Services
1
)
Insert a dialling pause
49