Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating Elements
Wall installation
The telephone can also be installed on a wall. Use two screws for the
necessary fixation. Drill two holes 67 mm apart and horizontal to each
other and insert the screws leaving approx. 5 mm projecting from the
wall. The tabletop support is not required for wall installation. Attach the
base unit by hooking it in the two screws protruding from the wall and
pushing it down a bit.
In order that the receiver does not fall when placed on−hook, the recei-
ver cradle is equipped with a small receiver hook. Turn the receiver
hook in the receiver cradle 180° so that the receiver can be hooked in.
3 Operating Elements
Underside
1
Rubber footpads
2
Telephone line connection
3
Tabletop support
4
Bracket for
wall installation
5
Battery compartment
6
Jack for helix cable, receiver
7
Ringing volume"
sliding switch
42
Warning: Ensure that there are no lines (cables or pipes etc
wall where you want to drill the holes.
1
2
4
1
3
1
4
5
6
7
1
Publicité
Table des Matières
