Appropriate Usage; Feature Diagram - Beha-Amprobe AC50A Mode D'emploi

1.800.544.2843
�� Appropriate Usage
• The instrument may only be used under the conditions and purposes
for which it was conceived. For this reason, in particular the safety
references, the technical data including environmental conditions
and the usage in dry environments must be followed.
• If the instrument is modified in any way, operational safety is no
longer ensured.
• The instrument may only be opened by an authorized service
technician, e.g. for fuse replacement.

Feature Diagram

1. Induction coil (clamp)
2. Selector switch to change
measurement type
3. Data hold button (Not
available in Continuity
function)
4. MIN/MAX value (page 8)
5. Zero setting / relative
value function. Once this
button is pressed, the
current reading shall be
set to zero and be used
as a zero reference value
for all other subsequent
measurement. The Zero/
REL is not available in
the Continuity and Hz
function.
6. Frequency range select
switch. At 50/60Hz
position, only the low
frequency signal is
measured. At Wide
position, signal from 40 -
1kHz is measured.
7. Digital display
8. Input socket, for
measuring voltage,
resistance, continuity
testing
9. Hand-hold area including
barrier (9a)
6
www.calcert.com
15
10 20
5 25
0 30
sales@calcert.com