PURE JONGO T2 Guide De Démarrage Rapide page 13

Technical specifications
Jongo T2
Speakers
Audio output
Input connectors
Controls
Network
Codec support
Mains power supply
Dimensions
Weight
Approvals
2 full-range 3" drive units
2 x 10W RMS
15V DC power adaptor socket (110-230V supplied), 3.5mm
line-in for auxiliary devices.USB A for product upgrades and
Ethernet connectivity (optional adapter available)
Power, Vol+, Vol-, Mute, Wi-Fi setup, Reset
Wi-Fi: 802.11b and 802.11g supported with WEP and
WPA/WPA2
Ethernet (requires optional adapter): 10/100 Mbps
Bluetooth: A2DP supported
Includes WMA (Standard V9), AAC, MP3, MP2
Adapter:
Input 100-230V AC, 50/60Hz, 0.5A;
Output 15V DC, 1500mA
Main unit: 15V DC, 1500mA
9.8" (250 mm) wide x 4.7" (120 mm) deep x 5.9" (150 mm)
high
2.7 lbs (1.104 kg)
CE marked. Hereby, Pure, declares that this Band II LPD
device is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC. The
Declaration of Conformity may be consulted at:
http://www.pure.com/R&TTE-DoC
Australian C-Tick N1600 and Electrical Safety
EN
11