Table des Matières
Publicité
PROBLEM
The appliance does not come on.
Steam comes out of the bottom of the
appliance.
Water leaks out from the holes in the
bottom of the sole plate.
Brown coloured fluid leaks from the
sole plate.
The first time the appliance is turned on,
you notice smoke.
The appliance emits an intermittent
noise associated with vibrations.
The appliance emits a continuous noise
associated with vibrations.
Disposal
Important information for correct disposal of the product in accordance with EC Directive 2002/96/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority
differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids
possible negative consequences for the environment and health deriving from inappropriate disposal and enables the constituent materials to
be recovered to obtain significant savings in energy and resources.As a reminder of the need to dispose of household appliances separately, the
product is marked with a crossed-out wheeled dustbin.
CAUSE
The appliance is not plugged into a
mains socket.
The maximum pressure safety system
has tripped.
The thermostat knob on the iron is not in
the sector shown in fig. 7.
Water has condensed inside the tubes
because steam is being used for the first
time, or has not been used for some
time.
The ironing system is positioned on an
unstable and/or sloping surface.
Chemical water softeners or additives
have been poured into the water tank or
steam generator.
Some parts have been treated with
sealer/lubricant which evaporates the
first time the iron heats up.
Water is being pumped into the steam
generator.
45
Troubleshooting
REMEDY
Make sure the appliance is correctly
connected and press the iron and steam
generator buttons.
Turn the appliance off immediately
and contact an authorised De'Longhi
Customer Services.
Position the thermostat regulation knob
on the iron in the steam sector shown
in fig. 7.
Press the steam button several times
away from the ironing board. This will
eliminate cold water from the steam
circuit.
Rest the ironing system on a stable flat
surface.
Never pour products into the water tank
(see our tips in the quick guide). Clean
the sole plate with a damp cloth.
This is normal and will stop when you
have used the iron a few times.
This is completely normal.
Unplug the system from the mains
and contact an authorised De'Longhi
Customer Services.
en
Publicité
Table des Matières
