Product & Cabinet Dimensions - Frigidaire Gallery Serie Instructions D'utilisation

30" GAS SLIDE-IN RANGE INSTALLATION INSTRUCTIONS
Product Dimensions
Do not
install the unit in the
cabinet before reading
next two pages.
A. HEIGHT B.
(Under Cooktop) WIDTH
35 7/8" (91,1 cm) 30"
36 5/8" (93 cm) (76,2 cm)
NOTES:
1
Do not pinch the power supply cord or the flexible gas conduit between the range and the wall.
2
Do not seal the range to the side cabinets.
3
24" (61 cm) minimum clearance between the cooktop and the bottom of the cabinet when the
bottom of wood or metal cabinet is protected by not less than 1/4" (0,64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet metal, 0,015" (0,4 mm) stainless steel,
0,024" (0,6 mm) aluminum, or 0,020" (0,5 mm) copper.
30" (76,2 cm) minimum clearance when the cabinet is unprotected.
4
For cutouts below 22 7/8" (58,1 cm), appliance will slightly show out of the cabinet.
5
Allow at least 19 ¼" (48.9 cm) clearance for door depth when it is open.
(Models with Sealed Top Burners)
Door Open
(see note 5)
B
C. D. TOTAL DEPTH
COOKTOP TO FRONT OF
WIDTH RANGE
31 ½" 28 5/16"
(80 cm) (71,9 cm)
21¾"
(55.25 cm)
Side Panel
E. CUTOUT WIDTH F. CUTOUT DEPTH
(Countertop and
cabinet)
30±1/16" 21 3/4" (55,2 cm) Min.
(76,2±0,15 cm) 22 1/8" (56,2 cm) Max
24" (61 cm) Min. with
backguard
3
C
A
D
G. HEIGHT
OF COUNTERTOP
36 5/8" (93 cm) Max.
35 7/8" (91,1 cm) Min.