Installing Or Removing Battery Pack; Description Of The Most Important Components - Soraton SA PowerMax HPS-4C-14.4V Mode D'emploi

Installing or removing battery pack

1. Always switch off the machine before insertion or removal of the
battery pack.
2. To remove the battery pack, push the button on the battery pack and
pull the tool unit from the battery pack in the direction.
3. To insert the battery pack, align the tool unit slides with the battery
pack sliding groove and push the tool unit into place. The tool unit
can be slide into battery pack in two directions
4. Do not force the battery pack in sliding it into tool unit. If the battery
pack does not slide in easily, it is not being inserted correctly.
Charging the battery pack
1. Plug the fast charger into the power source.
2. Slide the battery pack from upper side of the charger and push it
down to network direction.
3. Make sure on the charger the red light is illuminated. The charging
process starts.
5

Description of the most important components

EN 18