Use; Technical Data; Safety Instructions And Accident Prevention - Soraton SA PowerMax HPS-4C-14.4V Mode D'emploi

1

Use

Dear Customer,
Thank you for buying the PowerMax cordless dispenser HPS-4C-14.4V
The HPS-4C-14.4V facilitates the injection mortar into 380ml to 410ml 10:1
coaxial cartridges.
Before you put the device into operation, please read the complete instructions for
use and note the safety information in these instructions.
With the HPS-4C-14.4V cordless dispenser, two-component injection mortar and
other cartridges can be injected with the help of an electric motor drive.
Please note, only properly qualified and authorised personnel is allowed to use the
cordless dispenser.
With proper handling, risk of accidents and processing problems are avoided. The
user of the device, and not the manufacturer, is responsible for all damage to ob-
jects and all injuries to persons that arise from improper use.
2

Technical data

Application:
■
Battery pack (battery):
■
Injection force:
■
Feed speed:
■
Runback:
■
Weight: (net)
■
Charging time:
■
Battery charging:
■
3

Safety instructions and accident prevention

User's duty of care
With the PowerMax HPS-4C-14.4V cordless dispenser you have chosen a device
that was designed and manufactured in careful compliance with existing standards
and technical specifications. It corresponds to the current state of technology and
guarantees maximum safety.
EN 13
380ml to 410ml 10:1 coaxial cartridges
14.4V 3 . 0 A H //Lithium ion battery
Up to 7500 N (in permanent operation)
Can be set from 100 - 240 mm/min
The runback prevents the cartridge from over-
travelling.
2.6 kg
40 mins
One battery charge is enough for the injection of
approx. 15 cartridges, at a room temperature of
approx. 20 °C.