Philips DailyClean Mode D'emploi page 14

14
English
Smartimer
Easy-start
Note: When you use the toothbrush for the first
time, the default setting is the low intensity.
- Press the power button once to turn on the
toothbrush.
- Press a second time within 2 seconds to
change the intensity.
- Press a third time within 2 seconds to pause.
After 2 seconds of brushing, pressing the power
button again will also pause the toothbrush.
The Smartimer indicates that your brushing cycle is
complete by automatically turning off the
toothbrush at the end of the brushing cycle.
Dental professionals recommend brushing no less
than 2 minutes twice a day.
Note: If you press the power on/off button after
you started the brushing cycle, the toothbrush will
pause. After a pause of 30 seconds, the Smartimer
resets.
The Easy-start feature gently increases power over
the first 14 brushings to help you get used to
brushing with the Philips Sonicare toothbrush. This
Philips Sonicare toothbrush comes with the Easy-
start feature activated.
Activating or deactivating Easy-start
1 Put the handle on the plugged-in charger.
2 Press and hold the power on/off button while
the handle remains on the charger.
3 Keep the power on/off button pressed until you
hear a single short beep (after 2 seconds).
4 Release the power on/off button.
- Triple tone of low-med-high means the
Easy-start feature has been activated.