INVENTOR PR1-30XL Manuel D'utilisateur page 17

Drain hose water leakage
Check the correct installation of the drain hose.
l
Check for any blockage or damage of the drain hose.
l
Understanding Error and Indicator lights
Error Codes:
E-122 Tube temperature sensor error- Unplug unit then re-plug. If error repeats, service
required.
E142- Room temperature sensor and humidity sensor error- Unplug unit then re-plug. If error
repeats, service required.
E163-Main control board parameters fault error- Unplug unit then re-plug. If error repeats,
service required.
E554- Refrigerant leakage detection—This new technology detects refrigerant leakage and is
indicated on the control panel when code E554 appears. Service is required.
Indicator lights Display:
NO W
Actual humidity level indication light
SE T Desired set humidity level indication light
Auto stop indication light
Full tank indication light
All the pictures in the manual are for explanatory purposes only. The actual shape of the unit
you purchased may be slightly different, but the operations and functions are the same.
The company may not be held responsible for any misprinted information. The design and
the specifications of the product for reasons, such as product improvement, are subject to
change without any prior notice.
Please consult with the manufacturer at +30 211 300 3300 or with the Sales agency for
further details. Any future updates to the manual will be uploaded to the service website,
and it is advised to always check for the latest version.
Scan here to download the latest version of this manual.
EN
Error Codes are displayed on the control panel in a sequence
of two digits at a time. For example if the code is E122 then
the control panel will show the first two digits (E1) for one
second and then will display the last two digits (22) for
another second. This process will circle .
www.inventorappliances.com/manuals
17