INVENTOR PR1-30XL Manuel D'utilisateur page 10

is automatically adjusted to high fan speed and the louver will shut. After a maximum of two-
hour operation the SHOES mode will terminate.
Remove the
n
SHOES dryer cover
Upon completion, remove the SHOES dryer pipe
n
CLOTHES
When the CLOTHES function has been selected, the unit operates under Continuous mode
and the CLOTHES indication light will be activated. The FAN is set automatically to high fan
speed and the louver's angle will be set at 45º.
• For drying clothes: place the dehumidifier in a small room and set nearby the
clothes rack. Keep doors shut and allow the dehumidifier to dry the clothes.
• For optimal results manual wringing of the clothes is suggested.
• Allow 30-50cm distance from the moist clothes.
10
Attach the SHOES dryer
n
pipe to the unit
• Under SHOES mode, the FAN & SWING options are
not available .
• While operating under any other mode, please
ensure that the shoes accessory hose, has been
removed and the plastic cover, has been replaced.
This function can't work simultaneously with the
SHOES or AUTO modes activated.
Place the SHOES dryer
n
pipe on selected shoes
EN