Control Panel • Functions - INVENTOR NAM-ION200 Manuel D'utilisateur

6. CONTROL PANEL • FUNCTIONS
POWER
By pressing the "POWER" button the air purifier turns on or off.
FAN
Press the "FAN" button to select among the Turbo, High, Medium or Low fan speed.
• Low mode: When activated the indicator is turned on. Select Low Mode for quite operation
in order to enjoy ideal conditions.
• Medium mode: When activated the indicator will be turned on. Select this mode for normal
operation.
• High mode: When activated the indicator will be turned on. Select this mode when the
atmosphere in your place is full of dust and smoke and the conditions are too uncomfortable.
• Turbo mode: When activated the indicator will be turned on. Select this mode when
immediate purification is necessary, such as areas or rooms that are unused for an extended
period of time.
TIMER
Press the "TIMER" button to set the unit off by 1/2/4/8 hours. The unit switches off after the
selected period of time (1/2/4 or 8 hours).
SLEEP
Press the "SLEEP" button (the indicator will turn on) to activate the sleeping mode, enjoying
ideal conditions during the night. By pressing the "SLEEP" button once again (the indicator
will turn off) setting the unit back to previous settings.
ION
Press the "ION" button to switch on or off the ionizer. By activating the ionizer, negative ions
are released to purify the air and remove unpleasant and unhealthy particles. By pressing
once again, this function will be terminated.
INDICATIONS
Filter: CLEANING REMINDER
The cleaning filter indicator will flash when it is essential to clean your filter. After cleaning
and positioning the filter back to the unit and press the "ION" button for 3 seconds to reset
the timer.
EN
9