Storage; Frequently Asked Questions & Troubleshooting - INVENTOR NAM-ION200 Manuel D'utilisateur

8. STORAGE

When unit is inactive for an extended period of time, please make sure you follow the
instructions below, for the appropriate storage of your appliance:
• Turn unit off allowing one day before storage.
• Clean the air filter.
• Position and secure the power cord.
• Cover the device.
• Store the air purifier in upright position, in a dry, well ventilated area and avoid direct
sunlight.
9. FREQUENTLY ASKED QUESTIONS
& TROUBLESHOOTING
Where should
the air purifier be
placed ideally?
Can the filter
be replaced by
another type filter?
Why am I not able
to set the desired
mode by use of the
control panel?
The unit does not start
Make sure the air purifier's plug is placed completely into the socket.
l
Check the house fuse/circuit breaker box.
l
Check whether the power cord is damaged.
l
Purifier does not purify the air as efficient
Make sure the filter has been installed properly.
l
Make sure that the air purifier has been operating enough time to remove the dust and
l
smoke.
Make sure there are no curtains, blinds or furniture blocking the front or back of the device.
l
EN
NEVER USE THE DEVICE
WITHOUT THE AIR FILTER
For optimal results, it is suggested that the purifier is placed in
a central area. Doors within the household should be open in
order for the air purifier to enhance its operation.
The filter cannot be replaced by any other type of filter since it
is specifically designed to operate with this unit.
In order to access the mode settings, you first ensure that the
"Lock" mode us deactivated. Press simultaneously the FAN" and
"TIMER" buttons simultaneously for one second to turn off the
"Lock" mode and proceed with the desired setting.
11