Cleaning And Maintenance - Philips BT5275 Mode D'emploi

1 If the comb is still on the trimming head, pull it off.
Never pull at the flexible top of the comb. Always pull at the sides.
2 Turn the trimming head until the side you want to use points to the
front of the appliance.
3 Press the on/off button to switch on the appliance.
4 Hold the appliance in the position that is most convenient for the
area you want to trim and make upward or downward strokes.
Tip: For a comfortable trim close to your skin, place the flat side of the
trimming head against your skin and make strokes in the desired direction.
5 When you are finished, press the on/off button to switch off the
appliance.

Cleaning and maintenance

Clean the appliance after every use.
Never use compressed air, scouring pads, abrasive cleaning agents or
aggressive liquids such as petrol or acetone to clean the appliance.
Note: The trimming head does not need any lubrication.
Cleaning the appliance and the comb
1 Switch off the appliance.
ENGLISH
9