Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Page 4
P
O
Step 13:
XB, ZB, XN, ZN Models ONLY
13. Slide MOUNTING FRAME (O) onto fan housing. Pull
frame up around housing until it snaps into place.
Secure mounting frame to fan housing with (2) #8
X 3/8" FLAT HEAD SHEET METAL SCREWS (P)
supplied in the fan parts bag.
R
Q
Step 14:
QT Models ONLY
14. Attach MOUNTING CHANNELS (Q) to housing using
SCREWS (R) supplied in fan parts bag.
Insert SLIDE BRACKETS (S) into mounting channels.
L
S
INSERT
TAB INTO
SLOT IN
HOUSING
TOP AND BOTTOM FLANGES
REMAIN OUTSIDE OF HOUSING
15. Install 6" DUCT CONNECTOR (T) to fan housing and
secure with screw supplied in fan parts bag.
RDFUWT – Installation Guide
T
SCREW FROM
PARTS BAG
Publicité
Table des Matières
