M-Spa JetSpa M210A Mode D'emploi page 7

5. Connect the control box with the Spa; Screw
the connectors tight.
(5)
7. Wrap the foam connection piece with the
PVC leather.
(7)
9. Stop inflating when the black indicator of the ba-
rometer reaches the red area, the screw the air valve
tightly.
Black indicator
Inflate
Connector
(9)
Red area
Barometer
6. Fit the foam connection pieces between the
Spa and control box until it hold firm.
8. Connect air pump and barometer again
to the valve to make a further inflation.
(8)
Barometer
Attention:
1. Do not over inflate.
2. Be sure the pump is unplugged before connect-
ing it to the spa.
7
(6)
Foam
Air pump
Connection