Title Assignment; Troubleshooting - JVC KW-XG500 Manuel D'instructions

Notice:
When operating an iPod or a D. player, some
operations may not be performed correctly or as
intended. In this case, visit the following JVC web
site:
For iPod users: <http://www.jvc.co.jp/english/
car/support/ks-pd100/index.html>
For D. player users: <http://www.jvc.co.jp/
english/car/support/ks-pd500/index.html>

Title assignment

• If you try to assign titles to more than 30 station
frequencies, "NAMEFULL" appears. Delete unwanted
titles before assignment.

Troubleshooting

What appears to be trouble is not always serious. Check the following points before calling a service center.
Symptom
• Sound cannot be heard from the speakers.
• The unit does not work at all.
• SSM automatic presetting does not work.
• Static noise while listening to the radio.
• Disc cannot be played back.
• CD-R/CD-RW cannot be played back.
• Tracks on the CD-R/CD-RW cannot be skipped.
• Disc can neither be played back nor ejected.
• Disc sound is sometimes interrupted.
• "NO DISC" appears on the display.
26
General settings—PSM
• "AUTO" setting for "DIMMER" may not work correctly
on some vehicles, particularly on those having a
control dial for dimming.
In this case, change the "DIMMER" setting to any
other than "AUTO."
• If you change the "AMP GAIN" setting from
"HIGH PWR" to "LOW PWR" while the volume level
is set higher than "VOL 30," the unit automatically
changes the volume level to "VOL 30."
Remedy/Cause
• Adjust the volume to the optimum level.
• Check the cords and connections.
Reset the unit (see page 3).
Store stations manually.
Connect the antenna firmly.
Insert the disc correctly.
• Insert a finalized CD-R/CD-RW.
• Finalize the CD-R/CD-RW with the component which
you used for recording.
• Unlock the disc (see page 10).
• Eject the disc forcibly (see page 3).
• Stop playback while driving on rough roads.
• Change the disc.
• Check the cords and connections.
Insert a playable disc into the loading slot.