Setting The Language, Date And Time; Formatting (Initializing) Microsd Cards - Tascam Portacapture X8 Mode D'emploi

Setting the language, date and time

Selecting the language
The first time the unit is turned on after purchase, the LAN-
GUAGE screen will open.
1.
Swipe the screen vertically to find the desired language.
Options
ENGLISH: Use English (default setting)
日本語: Use Japanese
FRANCAIS: Use French
ESPAÑOL: Use Spanish
DEUTSCH: Use German
ITALIANO: Use Italian
中文: Use Chinese
한글: Use Korean
русский язык: Use Russian
2.
Tap the desired language to set it.
NOTE
The language setting can be set again using the GENERAL
SETTINGS screen > SYSTEM page > LANGUAGE item. See the
Reference Manual for details.
Setting the date and time
After setting the language and whenever the date and time
has been reset, the DATE/TIME screen will open to enable
setting them.
1.
Touch and swipe the numbers to set the date and time.
2.
Tap the SET button to confirm the settings.
NOTE
i After the date and time are set, the format confirmation
screen will open if a microSD card that requires format-
ting is loaded.
i Date and time settings can also be changed using the GEN-
ERAL SETTINGS screen > SYSTEM page > DATE/TIME item.(see
"GENERAL SETTINGS screen" on page 15)

Formatting (initializing) microSD cards

The following message will appear if an unformatted card is
loaded.
Tap QUICK FORMAT or ERASE FORMAT to start formatting.
e
p We recommend using ERASE FORMAT when formatting
microSD cards the first time they are used with this unit.
p After formatting completes successfully, the LAUNCHER
(app selection) screen will open.
CAUTION
Formatting will erase all data on a microSD card.
Back up to a computer, for example before formatting a
card.
NOTE
i Formatting can also be executed using the GENERAL
SETTINGS screen > SYSTEM page > MEDIA FORMAT item.
(see "GENERAL SETTINGS screen" on page 15)
i Using the ERASE FORMAT option might improve writing
performance that has decreased due to repeated use.
If "Write error REC continue" or "Card slow Check BOF
MARK" appears during recording, format the card using
the ERASE FORMAT option.
i ERASE FORMAT checks the memory for errors while
formatting, so it takes more time than QUICK FORMAT.
TASCAM Portacapture X8
11