Publicité
Les langues disponibles
Les langues disponibles
SK100
will be possibile to insert other keys to programm, verifying that red LED is turned on fixed for
each key,sign of the happended coding.
By pressing three times programming key (or after 3 min and 30 sec.)it will return to the
operational phase; the external control of LEDs will be active again.
Coding of the keys with a new code acquired by an already encoded key:
Disconnect,eventually, the burglar alarm through the mechanical key of the control unit.
Insert the coded key from which you want to acquire the code: the card won't recognize the
code of the key and the relay "False Key" will be excited, causing the simoultaneous flash of
the two LEDs.
Leaving the key always inserted, press again the programming key for 4 seconds: the fixed
lighting of the red LED will signal that the code has been acquired and memorized in the card.
Extracting the key the red LED will flash, and now it is possible to insert a new key to code with
the new code just acquired.
The red LED will switch off for some seconds to indicate that it has recognized the presence of
a key in the connector; if it will light fixed, the key will have been encoded with the new code
present in the memory of the card; it it will relight flashing, the key won't have been encoded
being broken or badly inserted in the connector.
Removing the key the red LED will flash again and it will be possible to insert other keys to
program, verifying for each key that the red LED is turned on fixed, sign of the happened
coding.
Pressing three times the programming key (or after 3 min.and 30 sec.) we will return in
operational phase; the external control of the LEDs will be active again.
Coding of the keys with a new code acquired by an already encoded key:
Disconnect,eventually, the burglar alarm through the mechanical key of the control unit.
Insert the coded key from which you want to acquire the code: the card won't recognize the
code of the key and the relay "False Key" will be excited, causing the simoultaneous flash of
the two LEDs.
Leaving the key always inserted, press again the programming key for 4 seconds: the fixed
lighting of the red LED will signal that the code has been acquired and memorized in the card.
Extracting the key the red LED will flash, and now it is possible to insert a new key to code with
the new code just acquired.
The red LED will switch off for some seconds to indicate that it has recognized the presence of
a key in the connector; if it will light fixed, the key will have been encoded with the new code
present in the memory of the card; it it will relight flashing, the key won't have been encoded
being broken or badly inserted in the connector.
Removing the key the red LED will flash again and it will be possible to insert other keys to
program, verifying for each key that the red LED is turned on fixed, sign of the happened
coding.
Pressing three times the programming key (or after 3 min.and 30 sec.) we will return in
operational phase; the external control of the LEDs will be active again.
8
security
Publicité
