Setting the alarm and sleep timer
The alarm in Evoke switches the radio on (if in standby) and tunes to a digital or FM radio station or sounds a tone.
Note: The alarm function does not work when Evoke is being powered by the ChargePAK B1.
PM
2
t news
Setting the alarm
DAB
1. Press the Menu button.
ALARM
2. Turn and press the Select dial to choose 'ALARM'.
3. Turn and press the Select dial to choose 'ON'.
ALARM
4. Turn and press the Select dial to set the hour for the alarm. Repeat to set the
ON
minutes for the alarm.
5. Turn and press the Select dial to specify one of the following alarm repeat
options: 'ONCE', 'DAILY', 'WEEKDAYS', 'WEEKENDS', 'SATURDAY' or 'SUNDAY'
ON TIME
and press the Select dial to confirm.
7-00 AM
6. Turn and press the Select dial to specify 'FM', 'DAB' or 'TONE'. If you are
specifying a tone alarm, skip to step 9.
7. Turn and press the Select dial to specify which station should be played when the
REPEAT
alarm goes off. You have the option of selecting one of your preset stations or you
DAILY
can select 'LAST USED' to select the station that you were last listening to.
8. Turn and press the Select dial to set the volume that the radio will play at when
SOURCE
the alarm sounds.
9. The alarm icon will appear on the display to show that the alarm is set.
TONE
Cancelling a sounding alarm
ALARM
To cancel a sounding tone alarm, press either the Menu or Source button, or push the
Select dial.
SAVED
Note: If you have set up your alarm to tune into a radio station, you can only cancel the
alarm by pressing the Standby (
Snoozing a sounding alarm
BBC R1
To snooze a sounding alarm, press either the 1, 2, 3 or 4+ preset number buttons.
NEWSBEAT
Disabling an alarm
1. Press the Menu button.
2. Turn and press the Select dial to choose 'ALARM'.
3. Turn and press the Select dial to choose 'OFF'.
4. The alarm icon on the display will disappear.
) button.
EN
9