CapsoVision CapsoAccess Instructions D'utilisation page 15

Table 4 — Recommended separation distances between portable and mobile RF communications
equipment and the CapsoAccess® system (CDAS3)
The CapsoAccess® system is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The
customer or the user of the CapsoAccess® system can help prevent electromagnetic interference by maintaining a minimum distance
between portable and mobile RF communications equipment (transmitters) and the CapsoAccess® system as recommended below,
according to the maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
W
0.01
0.1
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people.
14
Separation distance according to frequency of transmitter
150 kHz to 80 MHz
d = 1.2√P
0.12
0.38
1.2
3.8
12
IFU-2800 Rev E 11/18
m
80 MHz to 800 MHz
d = 1.2√P
0.12
0.38
1.2
3.8
12
800 MHz to 2.7 GHz
d = 2.3√P
0.23
0.73
2.3
7.3
23