METRICA DIGIGRAD Manuel D'utilisation page 11

- Battery charge icon (2) is displayed when the remaining battery
time is approximately 2 hours.
- Press the ON / OFF button for > 2 sec. to turn off the display.
DiSpLay OvertUrning
With the display on, press the ON / OFF button for about 1 sec.
to reverse the display.
Press again for about 1 sec. to return the display to its normal
position.
If the symbol indicating the degree is located in the
bottom left, it means that the display is upside down.
When the vertex of the angle to be measured is on the right, place
the instrument with the main arm as the base (Fig. A), with the
display showing upright reading positioned to the right
For a correct reading, the number displayed must always be
on the right side of the screen
Fig. A
.
.
When the vertex of the angle to be measured is on the left (Fig. B) it
is necessary to place the instrument with the adjustable arm (12)
as a basis and take the reading on the arm after having reverted
the display (see Instructions).
For a correct reading, the number displayed must always be
on the right side of the screen
ReCaLiBRaTiON
If the unit is dropped or an inaccuracy of the instrument is su-
spected, it is possible to recalibrate the zero point.
With the instrument powered on and the arms (12) and (13) clo-
sed together, simultaneously press the ON / OFF (10) and HOLD /
SUP (9) for > 1 sec. to reset the angle to 0°.
Fig. B
.