G
®
THERMASREG
Electronic room temperature controllers, climate controllers THERMASREG
heating and cooling, optional as continuous climate controller with manual ventilator speed regulation, setpoint adjustment, and LED status indicators.
Application in dry individual rooms heated respectively cooled by radiators, cooling ceilings, or ventilation or air conditioning systems, or as remote
control unit for air conditioners, e.g. in hotels, offices, or hospitals or as room thermostat.
TECHNICAL DATA:
Power supply: ........................ 24 V AC ⁄ DC ± 10 %
Temperature sensor: ............... internal or external
Control range: ........................ + 5 ... + 30 °C, adjustable via setpoint potentiometer with numerical scale or
Output: ................................. 1 x heating .......................................................... 1 x cooling
Proportional band: .................. heating .............................................................. cooling
Neutral zone: ......................... internally adjustable via potentiometer,
Control mode: ........................ PI
Enclosure: ............................. plastic, material ABS,
Dimensions: ........................... 98 x 106 x 34 mm (Frija II, with potentiometer)
Installation: ........................... wall mounting or on in-wall flush box Ø 55 mm,
Electrical connection: ............. 0.14 - 2.5 mm
Humidity: .............................. max. 90 % r. H., non-precipitating air
Protection class: .................... III (according to EN 60 730)
Protection type: ..................... IP 30 (according to EN 60 529)
Standards: ............................ CE conformity,
RTR -S
Pt 1000 according to DIN EN 60751, class B
21 °C (± 8 K), adjustable via setpoint potentiometer with swelling arrow (central position ⁄ + ⁄ –)
0 - 10 V or 10 - 0 V repluggable,
max. 5 mA
internally adjustable via potentiometer,
+ 0.5 ... + 3 K (1K factory setting)
1 ... + 5 K (1K factory setting)
colour pure white (similar RAL 9010)
base with 4-hole for mounting on vertically or horizontally installed
in-wall flush boxes for cable entry from the back, with predetermined
breaking point for on-wall cable entry from top ⁄ bottom in case of
plain on-wall installation
2
via terminal screws on circuit board
electromagnetic compatibility
according to EN 61 326 + A1 + A2,
EMC directive 2004 ⁄ 108 ⁄ EC
®
RTR-S for monitoring or controlling temperatures with output 0 - 10 V for
0 - 10 V or 10 - 0 V repluggable,
max. 5 mA
internally adjustable via potentiometer,
+ 0.5 ... + 3 K (2 K factory setting)
10