Technical Data; Safety Instructions; English; Specified Conditions Of Use - Berner BACSD 14,4 V Notice Originale

TECHNICAL DATA

Code .............................................................................................
Drilling capacity in steel ................................................................
Drilling capacity in wood ...............................................................
Wood screws (without pre-drilling) ...............................................
No-load speed 1st gear ................................................................
No-load speed 2nd gear ...............................................................
Torque max with battery (1.5 Ah) .................................................
Torque max with battery (3.0 Ah) .................................................
Battery voltage..............................................................................
Drill opening range .......................................................................
Weight according EPTA-Procedure 01/2014 (1.5/2.0 Ah) ............
Weight according EPTA-Procedure 01/2014 (3.0/4.0/5.0 Ah) ......
Noise/vibration information
Measured values determined according to EN 60 745.
Typically, the A-weighted noise levels of the tool are:
Sound pressure level (K = 3 dB(A)) ............................................
Sound power level (K = 3 dB(A)) ................................................
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined
according to EN 60745.
Vibration emission value a
h
Drilling into metal .......................................................................
Uncertainty K= ...........................................................................
Screwing ....................................................................................
Uncertainty K= ...........................................................................
WARNING
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN
60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for diff erent
applications, with diff erent accessories or poorly maintained, the vibration emission may diff er. This may signifi cantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.

SAFETY INSTRUCTIONS

Wear ear protectors. Exposure to noise can cause hearing
loss.
Hold power tool by insulated gripping surfaces, when
performing an operation where the fasteners may contact
hidden wiring. Fasteners contacting a „live" wire may make
exposed metal parts of the power tool „live" and could give the
operator an electric shock.
Sawdust and splinters must not be removed while the machine
is running.
When working in walls ceiling, or fl oor, take care to avoid
electric cables and gas or waterpipes.
Remove the battery pack before starting any work on the
machine.
Do not dispose of used battery packs in the household refuse
or by burning them. Your power tool distributor will normally
retrieve old batteries to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System Berner chargers for charging System Berner
battery packs. Do not use battery packs from other systems.
Battery acid may leak from damaged batteries under extreme
load or extreme temperatures. In case of contact with battery
acid wash it off immediately with soap and water. In case of eye

ENGLISH

395 494 - Berner-BACSD14-4V.indd Abs1:20 395 494 - Berner-BACSD14-4V.indd Abs1:20
BACSD 14,4V
........BACSD 14,4V 03 00001- 99999
.............................13 mm
.............................35 mm
...............................7 mm
....................... 0-450 min
-1
..................... 0-1600 min -1
.............................45 Nm
.............................54 Nm
..........................14,4 V
...................... 1,5-13 mm
............................1,7 kg
............................1,9 kg
.............................88 dB (A)
.............................99 dB (A)
........................ < 2,5 m/s 2
............................1,5 m/s
2
........................ < 2,5 m/s
2
............................1,5 m/s 2
contact rinse thoroughly for at least 10 minutes and
immediately seek medical attention.
Lithium Ion batteries submit only discharged at the collection
points. Pole isolated to avoid short circuits.
Warning! To reduce the risk of fi re, personal injury, and product
damage due to a short circuit, never immerse your tool, battery
pack or charger in fl uid or al-low a fl uid to fl ow inside them.
Corrosive or conductive fl uids, such as seawater, certain
industrial chemicals, and bleach or bleach containing products,
etc., Can cause a short circuit.

SPECIFIED CONDITIONS OF USE

The electronic battery drill/screwdriver may be used for drilling,
as well as screwdriving for independent use away from mains
supply.
Do not use this product in any other way as stated for normal
use.
20
08.02.2019 08:55:27 08.02.2019 08:55:27