Ferm WEM1035 Traduction De La Notice Originale page 4

EN
Do not expose in rain
Wear ear and eye protection.
Wear protective gloves.
Always use a welding mask during
welding
Wear protecting clothes
Symbol for welding power sources which
are suitable for supplying power to
welding operations carried out in an
environment with increased hazard of
electric shock.
Standard for welding appliances
for manual metal arc welding with
EN60974-6
limited duty.
Electrode holder
Earth terminal
Falling voltage
Single-phase transformer
Earthed mains plug
Electrode diameter
Fusing 16A
I
Maximum primary current intensity in
1
Ampere
I
Secondary current intensity in Ampere
2
Load time, time between the reset (ON
(S)
operation) and the set (OFF operation) of
4
the thermal cut out device.
Reset time, time between the set (OFF
r
operation) and the reset (ON operation)
of the thermal cut out device.
IP21S
Protection class. Sealed for objects up to
12 mm and against perpendicular falling
drip water. Stoppage with water control.
H
Insulation class
U
Open voltage in Volts
0
U
Mains voltage in Volts
1
General safety instructions for welding
appliances
• The user of the machine must have been
instructed how to use and operate the
machine.
• Ensure a well-illuminated and tidy working
environment.
• Always remove the plug from the plug socket
before carrying out maintenance on the
machine.
• Remove the plug from the plug socket when
you leave the machine.
• Do not use the machine before you have fully
assembled and installed the machine as
described in the manual.
Specific safety instructions for welding
appliance
• Welding causes sparks and hot metal.
Remember that this is a fire hazard, and
remove all flammable objects from the working
environment.
• Ensure good ventilation in the working
environment. Gases are released when
welding that are a danger to your health.
• Do not weld containers or pipes that contain or
have contained flammable liquids or gases
(danger of fire or explosion).
• Do not weld materials that have been cleaned
with highly flammable liquids or that have
painted surfaces (likelihood of the release of
dangerous gases).
• Do not work in a humid or wet environment
and do not weld in the rain.
• Always protect your eyes with the welding
mask supplied.
• Use gloves and protective clothing that are dry
and not drenched in oil or dirt.
Ferm