Maintenance And Cleaning - Beumer BM 95 Mode D'emploi

Problem
Bluetooth connection failed.
®
The device ID does not ap-
pear under "Setting" in the
" beurer Cardio Expert" app.

9. Maintenance and cleaning

• Clean the main unit, ECG stick and cuff carefully using a slightly damp cloth only.
• Do not use any corrosive cleaning agents or solvents.
• If the electrode surfaces of the ECG stick are dirty, clean them with a cotton bud soaked in rub-
bing alcohol.
• When you are not using the ECG stick, disconnect it from the main unit.
• Under no circumstances should you hold the main unit, ECG stick or cuff under water, as this can
cause liquid to enter and damage the device internally.
• No heavy objects should be placed on top of the device when in storage. Remove the batteries.
The cuff line should not be bent sharply.
Possible cause
Connection problems be-
tween the smartphone/tablet
and the app.
Data transfer problem on ini-
tial connection.
59
Solution
Switch off the main unit, close the
app, and deactivate and reacti-
vate Bluetooth on your smart-
®
phone/tablet. Try to re-establish
the connection.
Switch off the main unit, close the
app, and deactivate and reacti-
vate Bluetooth on your smart-
®
phone/tablet. Try to re-establish
the connection.